Kawasaki Vulcan VN1700 Classic

Production years
2009–2010
Showing model year 2010
KAWASAKI VN1700 Classic (2011-2012)

1 / 10

KAWASAKI VN1700 Classic (2011-2012)

Selected year: 2010

Technical specifications

Engine capacity
1,700 cm³
Wet weight
345 kg
Seat height
719 mm

Overview

The 2010 Kawasaki Vulcan VN1700 Classic is a cruiser powered by a liquid-cooled, four-stroke V-twin with 1700 cm³ of displacement. It produces 136 Nm of torque at 2750 rpm, and the motorcycle weighs 345 kg.

The 719 mm seat height can make it easier to put a foot down at stops, while the 345 kg weight takes effort to maneuver at parking speeds. A belt final drive avoids chain cleaning and adjustment, and air-assisted rear shocks with four-way adjustment let riders tune the suspension. The 18.9-liter tank holds a defined amount of fuel, but fuel consumption is not available to estimate range.

Specifications

Engine

Engine

Engine capacity
1,700 cm³
Compression ratio
9.5:1
Stroke
102 mm
Performance and transmission

Performance and transmission

Torque
136 Nm at 2,750 rpm
Clutch
Wet multi-plate, manual
Final drive
Belt
Dimensions and weight

Dimensions and weight

Fuel capacity
18.9 L
Ground clearance
130 mm
Overall length
2,499 mm
Overall width
1,026 mm
Seat height
719 mm
Wet weight
345 kg
Wheelbase
1,666 mm

Pros and cons

Advantages

  • Low seat

    At 719 mm, the seat height can make it easier to reach the ground when stopped.

  • Belt final drive

    The belt needs no chain cleaning or adjustment.

  • Adjustable rear shocks

    The four-way-adjustable, air-assisted rear shocks let riders tune the suspension.

Things to consider

  • Heavy at low speed

    At 345 kg, the bike takes more effort to maneuver in parking lots and at walking pace.

  • Limited ground clearance

    The 130 mm ground clearance leaves less room beneath the bike over bumps and uneven surfaces.

Rider fit

Rider fit calculator

Calculated in your browser

Kawasaki Vulcan VN1700 Classic: Estimated rider reach on the motorcycle. Both feet likely flat. Seat height: 719 mm; Inseam 78.9 cm.
Seat height: 719 mmInseam 78.9 cm
Seat height: 719 mm
cm
cm

Don't know it? Leave this empty and we'll estimate it from your height.

Estimated from your height: 79 cm

How to measure

Stand barefoot with your back to a wall. Hold a book firmly between your legs, then measure from the floor to the top edge of the book.

Estimated ground reach

Both feet likely flat

You should have a stable stance at a stop, although seat width and suspension setup still matter.

Seat height

719 mm

Approx. loaded height

689 mm

Estimate assumes about 30 mm of suspension sag. Seat width, footwear, luggage and suspension settings can change real reach. Always sit on the motorcycle before buying.

Fuel range calculator

Enter your expected fuel consumption to estimate the distance on a full tank, with or without a fuel reserve.

Tank 18.9 L at 5.5 L/100 km

L/100 km

Lower consumption = longer range.

Estimated range

344 km

With 10% reserve

309 km

This is a planning estimate, not a measured result. Speed, route, weather, load and riding style can change real consumption.

FAQ

What engine does the 2010 Kawasaki Vulcan VN1700 Classic have?

It has a liquid-cooled, four-stroke V-twin with 1700 cm³ of displacement.

How much torque does the 2010 Kawasaki Vulcan VN1700 Classic produce?

It produces 136 Nm at 2750 rpm.

How tall is the seat on the 2010 Kawasaki Vulcan VN1700 Classic?

The seat height is 719 mm.

Does the 2010 Kawasaki Vulcan VN1700 Classic have a chain drive?

No, it uses a belt final drive.

More from Kawasaki

All Kawasaki motorcycles

Other cruisers

All cruisers