Honda Scooters Dylan 150
- Production years
- 2006–2026
- Brand
- Honda
1 / 1
Selected year: 2026
Technical specifications
- Engine capacity
- 153 cm³
- Wet weight
- 120 kg
- Seat height
- 795 mm
Overview
The Honda Scooters Dylan 150 is a scooter produced for 2026. Its 153 cm³, liquid-cooled, single-cylinder, four-stroke engine uses SOHC with pushrods and makes 14 Nm of torque at 7,000 rpm; its weight is 120 kg.
Peak torque arrives at 7,000 rpm, so the engine needs to rev to deliver its strongest pull. The 795 mm seat height may make it harder for shorter riders to put both feet flat, while 130 mm of ground clearance leaves limited room over tall obstacles. A belt final drive avoids chain cleaning and adjustment; braking pairs a single front disc with a rear drum.
Specifications
Engine
Engine
- Engine capacity
- 153 cm³
- Compression ratio
- 11.0:1
- Fuel system
- Carburetor
- Stroke
- 58 mm
Performance and transmission
Performance and transmission
- Torque
- 14 Nm at 7,000 rpm
- Final drive
- Belt
- Gearbox
- Manual 4-speed
Dimensions and weight
Dimensions and weight
- Fuel capacity
- 8.7 L
- Ground clearance
- 130 mm
- Seat height
- 795 mm
- Wet weight
- 120 kg
- Wheelbase
- 1,331 mm
Brakes and wheels
Brakes and wheels
- Front brakes
- Single disc
- Rear brakes
- Drum
Pros and cons
Advantages
Belt final drive
The belt avoids the routine cleaning and adjustment required by a chain.
Manageable weight
At 120 kg, it should be easier to push around and maneuver at low speeds than a heavier machine.
Things to consider
Rear drum brake
The rear drum has less braking bite and heat capacity than a disc, leaving the front disc to handle more of the hard stops.
High seat
At 795 mm, the seat may make it difficult for shorter riders to put both feet flat on the ground.
Rider fit
Rider fit calculator
Calculated in your browser
Don't know it? Leave this empty and we'll estimate it from your height.
Estimated from your height: 79 cm
How to measure
Stand barefoot with your back to a wall. Hold a book firmly between your legs, then measure from the floor to the top edge of the book.
Estimated ground reach
Both feet likely flat
You should have a stable stance at a stop, although seat width and suspension setup still matter.
Seat height
795 mm
Approx. loaded height
765 mm
Estimate assumes about 30 mm of suspension sag. Seat width, footwear, luggage and suspension settings can change real reach. Always sit on the motorcycle before buying.
Fuel range calculator
Enter your expected fuel consumption to estimate the distance on a full tank, with or without a fuel reserve.
Tank 8.7 L at 3.5 L/100 km
Lower consumption = longer range.
Estimated range
249 km
With 10% reserve
224 km
This is a planning estimate, not a measured result. Speed, route, weather, load and riding style can change real consumption.
FAQ
What engine does the Honda Scooters Dylan 150 have?
It has a 153 cm³, liquid-cooled, single-cylinder, four-stroke engine with SOHC and pushrods.
How much torque does the Honda Scooters Dylan 150 produce?
It produces 14 Nm of torque at 7,000 rpm.
What kind of final drive does the Honda Scooters Dylan 150 use?
It uses a belt final drive.
What brakes does the Honda Scooters Dylan 150 have?
It has a single disc brake at the front and a drum brake at the rear.
