Kawasaki KX250X
- Production years
- 2026
- Brand
- Kawasaki
1 / 10
KAWASAKI KX250 (2025-Present)
Selected year: 2026
Technical specifications
- Engine capacity
- 249 cm³
- Wet weight
- 106 kg
- Seat height
- 945 mm
Overview
The Kawasaki KX250X is an Enduro Bike produced for 2026. Its 249 cm³, four-stroke, liquid-cooled DOHC single-cylinder engine uses DFI with a 44 mm Keihin throttle body and dual injectors; the motorcycle weighs 106 kg.
The 945 mm seat height puts the rider high above the ground, while 330 mm of clearance helps when riding over uneven terrain. Showa front suspension offers 305 mm of travel, and the Uni-Trak rear suspension has 307 mm; both ends have adjustable damping, with adjustable preload at the rear. The hydraulic clutch operates the wet multi-disc clutch, and the 6.2 L fuel tank sets the amount carried between stops.
Specifications
Engine
Engine
- Engine capacity
- 249 cm³
- Compression ratio
- 14.0:1
- Engine type
- four-stroke, single-cylinder, DOHC, liquid-cooled
- Fuel system
- DFI, 44 mm Keihin throttle body, dual injectors
- Stroke
- 53 mm
Performance and transmission
Performance and transmission
- Clutch
- wet multi-disc, manual, hydraulic actuation
- Final drive
- Chain
- Gearbox
- 5-speed, return shift,
Dimensions and weight
Dimensions and weight
- Fuel capacity
- 6.2 L
- Ground clearance
- 330 mm
- Overall length
- 2,179 mm
- Overall width
- 820 mm
- Seat height
- 945 mm
- Wet weight
- 106 kg
- Wheelbase
- 1,486 mm
Chassis and suspension
Chassis and suspension
- Front suspension
- 49 mm, Showa, inverted telescopic, coil-spring fork, 16-way compression and rebound damping, 305 mm/12.0 inch travel
- Rear suspension
- Uni-Trak, dual-range (4 turns high speed/19-way low-speed) compression damping, 22-way rebound damping and adjustable preload, 307 mm/12.1 inch travel
Brakes and wheels
Brakes and wheels
- Front brakes
- 270 mm
- Front tyre
- 80/100-21
- Rear brakes
- single 240 mm, petal disc, one-piston caliper
- Rear tyre
- 110/100-18
Pros and cons
Advantages
Adjustable suspension
Compression and rebound damping can be adjusted at both ends, and rear preload is adjustable, letting riders tune the suspension to conditions.
High ground clearance
The 330 mm clearance helps the motorcycle pass over uneven ground and obstacles.
Hydraulic clutch
Hydraulic actuation operates the wet multi-disc clutch without a clutch cable.
Things to consider
Tall seat
At 945 mm, the seat can make it harder for shorter riders to put a foot down at stops.
Chain final drive
The chain needs regular cleaning, lubrication, and adjustment.
Rider fit
Rider fit calculator
Calculated in your browser
Don't know it? Leave this empty and we'll estimate it from your height.
Estimated from your height: 79 cm
How to measure
Stand barefoot with your back to a wall. Hold a book firmly between your legs, then measure from the floor to the top edge of the book.
Estimated ground reach
Ground reach may be difficult
This seat may feel tall. A lower seat or suspension setup could make stops easier.
Seat height
945 mm
Approx. loaded height
915 mm
Estimate assumes about 30 mm of suspension sag. Seat width, footwear, luggage and suspension settings can change real reach. Always sit on the motorcycle before buying.
Fuel range calculator
Enter your expected fuel consumption to estimate the distance on a full tank, with or without a fuel reserve.
Tank 6.2 L at 6 L/100 km
Lower consumption = longer range.
Estimated range
103 km
With 10% reserve
93 km
This is a planning estimate, not a measured result. Speed, route, weather, load and riding style can change real consumption.
FAQ
What engine does the 2026 Kawasaki KX250X have?
It has a 249 cm³, four-stroke, liquid-cooled DOHC single-cylinder engine with DFI, a 44 mm Keihin throttle body, and dual injectors.
How much does the Kawasaki KX250X weigh?
It weighs 106 kg.
How high is the KX250X seat?
The seat height is 945 mm.
Is the KX250X suspension adjustable?
Yes, both ends have adjustable compression and rebound damping, and the rear suspension also has adjustable preload.
