Kawasaki Vulcan 2000

Production years: 2005–2010
Brand: Kawasaki

Choose model year

1 / 1

Selected year: 2010

Technical specifications

Engine capacity: 2,053 cm³
Power: 121 hp (90 kW)
Wet weight: 380.1 kg
Seat height: 681 mm

View full specifications Compare motorcycles

Overview

The Kawasaki Vulcan 2000 is a cruiser produced from 2005 to 2010. For 2010, its liquid-cooled 2053 cm³ four-stroke V-twin makes 121 hp (90 kW) and 191.2 Nm of torque at 2800 rpm, with a wet weight of 380.1 kg.

The 681 mm seat height puts the seat low, which can make it easier to get both feet down at a stop, while the 380.1 kg wet weight takes effort to maneuver at low speed. Its torque arrives at 2800 rpm, supporting strong pull at relatively low engine speed; the belt final drive avoids chain cleaning and adjustment, and the rear shock’s adjustable preload and rebound damping let riders tune its response.

Specifications

Engine

Bore x stroke: 103.0 x 123.2 mm
Engine capacity: 2,053 cm³
Compression ratio: 9.5:1
Cooling system: Liquid
Engine type: V-Twin, four-stroke
Fuel system: Injection
Ignition: TCBI with Digital Advance
Starting: Electric
Valves per cylinder: 4

Performance and transmission

Power: 121 hp (90 kW)
Power weight ratio: 0.3181 HP/kg (wet)
Torque: 191.2 Nm at 2,800 rpm
Final drive: Belt
Gearbox: Manual 5-speed
Transmission type: Manual

Dimensions and weight

Fuel capacity: 20.8 L
Ground clearance: 135 mm
Overall height: 1,156 mm
Overall length: 2,535 mm
Overall width: 1,026 mm
Seat height: 681 mm
Wet weight: 380.1 kg
Wheelbase: 1,735 mm

Chassis and suspension

Frame: Steel, double-cradle with box-section single-tube backbone
Front suspension: 49mm telescopic fork / 5.9 in.
Rake: 32.0°
Rear suspension: Triangulated steel tube swingarm with direct-action single shock, fully-adjustable spring preload, eight-way rebound damping / 3.9 in.
Trail: 183 mm

Brakes and wheels

Front brakes: Double disc
Front brakes diameter: 300 mm
Front tyre: 150/80-16
Rear brakes: Single disc
Rear brakes diameter: 320 mm
Rear tyre: 200/60-16

Colours and equipment

Colours: Metallic Titanium

Model years

2006

Engine capacity: 2,050 cm³ → 2,053 cm³; Power: 121 hp (90 kW) → 121 hp (90 kW)

Specification
Engine capacity	2,050 cm³	2,053 cm³	2,053 cm³	2,053 cm³	2,053 cm³	2,053 cm³
Power	121 hp (90 kW)	121 hp (90 kW)	121 hp (90 kW)	121 hp (90 kW)	121 hp (90 kW)	121 hp (90 kW)
Torque	—	191.2 Nm	191.2 Nm	191.2 Nm	191.2 Nm	191.2 Nm
Wet weight	380.1 kg	380.1 kg	380.1 kg	380.1 kg	380.1 kg	380.1 kg
Seat height	681 mm	681 mm	681 mm	681 mm	681 mm	681 mm
Fuel capacity	20.8 L	20.8 L	20.8 L	20.8 L	20.8 L	20.8 L

Pros and cons

Advantages

Strong low-speed pull
The V-twin produces 191.2 Nm at 2800 rpm, giving the bike substantial torque without needing high engine speed.
Low seat
A 681 mm seat height makes it easier for many riders to reach the ground at stops.
Adjustable rear shock
Adjustable spring preload and eight-way rebound damping provide ways to tailor the rear suspension response.

Things to consider

Heavy at low speed
At 380.1 kg wet, the Vulcan 2000 can take considerable effort to maneuver in parking lots and tight spaces.
Limited ground clearance
The 135 mm ground clearance leaves less room over uneven surfaces and when leaning into turns.

Rider fit

Rider fit calculator

Calculated in your browser

Seat height: 681 mmInseam 78.9 cm

Seat height: 681 mm

Your height

Inside leg lengthOptional

Don't know it? Leave this empty and we'll estimate it from your height.

Estimated from your height: 79 cm

How to measure

Stand barefoot with your back to a wall. Hold a book firmly between your legs, then measure from the floor to the top edge of the book.

Estimated ground reach

Both feet likely flat

You should have a stable stance at a stop, although seat width and suspension setup still matter.

Seat height

681 mm

Approx. loaded height

651 mm

Estimate assumes about 30 mm of suspension sag. Seat width, footwear, luggage and suspension settings can change real reach. Always sit on the motorcycle before buying.