Kawasaki Vulcan 900 Classic Special Edition

Production years: 2016–2017
Brand: Kawasaki

Choose model year

1 / 4

KAWASAKI Vulcan 900 Classic Special Edition (2011-2012)

Selected year: 2017

Technical specifications

Engine capacity: 903 cm³
Power: 48 hp (36 kW) at 5,700 rpm
Wet weight: 282 kg
Seat height: 680 mm

View full specifications Compare motorcycles

Overview

The Kawasaki Vulcan 900 Classic Special Edition is a cruiser produced for 2016–2017. The 2017 model uses a 903 cm³ liquid-cooled V-twin four-stroke engine making 48 hp (36 kW) and 78.9 Nm of torque at 3,500 rpm, with a wet weight of 282 kg.

Torque arrives at a relatively low 3,500 rpm, giving the engine useful pulling force without needing high revs. The 680 mm seat height makes it easier to reach the ground at stops, while the 282 kg wet weight can make slow-speed maneuvering more demanding. Belt final drive avoids chain cleaning and adjustment, and the rear spring preload has seven settings to suit different loads.

Specifications

Engine

Bore x stroke: 88.0 x 74.2 mm
Engine capacity: 903 cm³
Compression ratio: 9.5:1
Cooling system: Liquid
Engine type: V-Twin, four-stroke
Fuel system: Injection
Ignition: Digital
Starting: Electric
Valves per cylinder: 4

Performance and transmission

Power: 48 hp (36 kW) at 5,700 rpm
Power weight ratio: 0.1702 HP/kg (wet)
Torque: 78.9 Nm at 3,500 rpm
Clutch: Wet multi-disc
Final drive: Belt
Gearbox: Manual 5-speed
Transmission type: Manual

Dimensions and weight

Fuel capacity: 20.1 L
Ground clearance: 135 mm
Overall height: 1,064 mm
Overall length: 2,464 mm
Overall width: 1,006 mm
Seat height: 680 mm
Wet weight: 282 kg
Wheelbase: 1,646 mm

Chassis and suspension

Frame: Double-cradle, steel
Front suspension: 41mm hydraulic telescopic fork
Front wheel travel: 150 mm
Rake: 32.0°
Rear suspension: Uni-Trak swingarm, 7 way adjustable spring preload
Rear wheel travel: 100 mm
Trail: 160 mm

Brakes and wheels

Front brakes: Single disc. Hydraulic. Two-piston calipers.
Front brakes diameter: 300 mm
Front tyre: 130/90-16
Rear brakes: Single disc. Hydraulic. Two-piston calipers.
Rear brakes diameter: 250 mm
Rear tyre: 180/70-15

Colours and equipment

Colours: Metallic Matte Carbon Gray/Pearl flat Crystal White
Warranty: 12

Model years

No recorded specification changes between model years.

Specification
Engine capacity	903 cm³	903 cm³
Power	48 hp (36 kW)	48 hp (36 kW)
Torque	78.9 Nm	78.9 Nm
Wet weight	282 kg	282 kg
Seat height	680 mm	680 mm
Fuel capacity	20.1 L	20.1 L

Pros and cons

Advantages

Belt final drive
It avoids the routine chain cleaning and adjustment that chain-driven motorcycles require.
Adjustable rear preload
Seven preload settings let you tailor the rear suspension to the load the bike is carrying.
Low seat
At 680 mm, the seat makes getting a foot down at stops easier for many riders.

Things to consider

Heavy at low speed
Its 282 kg wet weight can take more effort to balance and maneuver in tight spaces.
Limited ground clearance
The 135 mm clearance leaves less room over steep ramps and raised road obstacles.

Rider fit

Rider fit calculator

Calculated in your browser

Seat height: 680 mmInseam 78.9 cm

Seat height: 680 mm

Your height

Inside leg lengthOptional

Don't know it? Leave this empty and we'll estimate it from your height.

Estimated from your height: 79 cm

How to measure

Stand barefoot with your back to a wall. Hold a book firmly between your legs, then measure from the floor to the top edge of the book.

Estimated ground reach

Both feet likely flat

You should have a stable stance at a stop, although seat width and suspension setup still matter.

Seat height

680 mm

Approx. loaded height

650 mm

Estimate assumes about 30 mm of suspension sag. Seat width, footwear, luggage and suspension settings can change real reach. Always sit on the motorcycle before buying.